Flexible Fiber-Shaped Supercapacitor Based on Nickel–Cobalt Double Hydroxide and Pen Ink Electrodes on Metallized Carbon Fiber

详细信息    查看全文

• 作者：Libo Gao ; James Utama Surjadi ; Ke Cao ; Hongti Zhang ; Peifeng Li ; Shang Xu ; Chenchen Jiang ; Jian Song ; Dong Sun ; Yang Lu
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2017
• 出版时间：February 15, 2017
• 年：2017
• 卷：9
• 期：6
• 页码：5409-5418
• 全文大小：959K
• ISSN：1944-8252

文摘

Flexible fiber-shaped supercapacitors (FSSCs) are recently of extensive interest for portable and wearable electronic gadgets. Yet the lack of industrial-scale flexible fibers with high conductivity and capacitance and low cost greatly limits its practical engineering applications. To this end, we here present pristine twisted carbon fibers (CFs) coated with a thin metallic layer via electroless deposition route, which exhibits exceptional conductivity with ∼300% enhancement and superior mechanical strength (∼1.8 GPa). Subsequently, the commercially available conductive pen ink modified high conductive composite fibers, on which uniformly covered ultrathin nickel–cobalt double hydroxides (Ni–Co DHs) were introduced to fabricate flexible FSSCs. The synthesized functionalized hierarchical flexible fibers exhibit high specific capacitance up to 1.39 F·cm^–2 in KOH aqueous electrolyte. The asymmetric solid-state FSSCs show maximum specific capacitance of 28.67 mF·cm^–2 and energy density of 9.57 μWh·cm^–2 at corresponding power density as high as 492.17 μW·cm^–2 in PVA/KOH gel electrolyte, with demonstrated high flexibility during stretching, demonstrating their potential in flexible electronic devices and wearable energy systems.