Facile and Scalable Synthesis Method for High-Quality Few-Layer Graphene through Solution-Based Exfoliation of Graphite

详细信息    查看全文

• 作者：Boon-Hong Wee ; Tong-Fei Wu ; Jong-Dal Hong
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2017
• 出版时间：February 8, 2017
• 年：2017
• 卷：9
• 期：5
• 页码：4548-4557
• 全文大小：665K
• ISSN：1944-8252

文摘

Here we describe a facile and scalable method for preparing defect-free graphene sheets exfoliated from graphite using the positively charged polyelectrolyte precursor poly(p-phenylenevinylene) (PPV-pre) as a stabilizer in an aqueous solution. The graphene exfoliated by PPV-pre was apparently stabilized in the solution as a form of graphene/PPV-pre (denoted to GPPV-pre), which remains in a homogeneous dispersion over a year. The thickness values of 300 selected 76% GPPV-pre flakes ranged from 1 to 10 nm, corresponding to between one and a few layers of graphene in the lateral dimensions of 1 to 2 μm. Furthermore, this approach was expected to yield a marked decrease in the density of defects in the electronic conjugation of graphene compared to that of graphene oxide (GO) obtained by Hummers’ method. The positively charged GPPV-pre was employed to fabricate a poly(ethylene terephthalate) (PET) electrode layer-by-layer with negatively charged GO, yielding (GPPV-pre/GO)_n film electrode. The PPV-pre and GO in the (GPPV-pre/GO)_n films were simultaneously converted using hydroiodic acid vapor to fully conjugated PPV and reduced graphene oxide (RGO), respectively. The electrical conductivity of (GPPV/RGO)₂₃ multilayer films was 483 S/cm, about three times greater than that of the (PPV/RGO)₂₃ multilayer films (166 S/cm) comprising RGO (prepared by Hummers method). Furthermore, the superior electrical properties of GPPV were made evident, when comparing the capacitive performances of two supercapacitor systems; (polyaniline PANi/RGO)₃₀/(GPPV/RGO)₂₃/PET (volumetric capacitance = 216 F/cm³; energy density = 19 mWh/cm³; maximum power density = 498 W/cm³) and (PANi/RGO)₃₀/(PPV/RGO)₂₃/PET (152 F/cm³; 9 mWh/cm³; 80 W/cm³).