Porous Ga–In Bimetallic Oxide Nanofibers with Controllable Structures for Ultrasensitive and Selective Detection of Formaldehyde

详细信息    查看全文

• 作者：Hui Chen ; Jiabo Hu ; Guo-Dong Li ; Qian Gao ; Cundi Wei ; Xiaoxin Zou
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2017
• 出版时间：February 8, 2017
• 年：2017
• 卷：9
• 期：5
• 页码：4692-4700
• 全文大小：644K
• ISSN：1944-8252

文摘

The design of appropriate composite materials with unique surface structures is an important strategy to achieve ideal chemical gas sensing. In this paper, efficient and selective detection of formaldehyde vapor has been realized by a gas sensor based on porous Ga_xIn_2-xO₃ nanofibers assembled by small building blocks. By tuning the Ga/In atomic ratios in the materials, crystallite phase, nanostructure, and band gap of as-obtained Ga_xIn_2-xO₃ nanofibers can be rationally altered. This further offers a good opportunity to optimize the gas sensing performances. In particular, the sensor based on porous Ga_0.6In_1.4O₃ nanofibers assembled by small nanoparticles (∼4.6 nm) exhibits best sensing performances. Toward 100 ppm formaldehyde, its highest response (R_a/R_g = 52.4, at 150 °C) is ∼4 times higher than that of the pure In₂O₃ (R_a/R_g = 13.0, at 200 °C). Meanwhile, it has superior ability to selectively detect formaldehyde against other interfering volatile organic compound gases. The significantly improved sensing performance makes the Ga_0.6In_1.4O₃ sensor very promising for selective detection of formaldehyde.