Flexible and Freestanding Supercapacitor Electrodes Based on Nitrogen-Doped Carbon Networks/Graphene/Bacterial Cellulose with Ultrahigh Areal Capacitance

详细信息    查看全文

• 作者：Lina Ma ; Rong Liu ; Haijun Niu ; Lixin Xing ; Li Liu ; Yudong Huang
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2016
• 出版时间：December 14, 2016
• 年：2016
• 卷：8
• 期：49
• 页码：33608-33618
• 全文大小：833K
• ISSN：1944-8252

文摘

Flexible energy-storage devices based on supercapacitors rely largely on the scrupulous design of flexible electrodes with both good electrochemical performance and high mechanical properties. Here, nitrogen-doped carbon nanofiber networks/reduced graphene oxide/bacterial cellulose (N-CNFs/RGO/BC) freestanding paper is first designed as a high-performance, mechanically tough, and bendable electrode for a supercapacitor. The BC is exploited as both a supporting substrate for a large mass loading of 8 mg cm^–2 and a biomass precursor for N-CNFs by pyrolysis. The one-step carbonization treatment not only fabricates the nitrogen-doped three-dimensional (3D) nanostructured carbon composite materials but also forms the reduction of the GO sheets at the same time. The fabricated paper electrode exhibits an ultrahigh areal capacitance of 2106 mF cm^–2 (263 F g^–1) in a KOH electrolyte and 2544 mF cm^–2 (318 F g^–1) in a H₂SO₄ electrolyte, exceptional cycling stability (∼100% retention after 20000 cycles), and excellent tensile strength (40.7 MPa). The symmetric supercapacitor shows a high areal capacitance (810 mF cm^–2 in KOH and 920 mF cm^–2 in H₂SO₄) and thus delivers a high energy density (0.11 mWh cm^–2 in KOH and 0.29 mWh cm^–2 in H₂SO₄) and a maximum power density (27 mW cm^–2 in KOH and 37.5 mW cm^–2 in H₂SO₄). This work shows that the new procedure is a powerful and promising way to design flexible and freestanding supercapacitor electrodes.