Low-Voltage Continuous Electrospinning Patterning

详细信息    查看全文

• 作者：Xia Li ; Zhaoying Li ; Liyun Wang ; Guokun Ma ; Fanlong Meng ; Robyn H. Pritchard ; Elisabeth L. Gill ; Ye Liu ; Yan Yan Shery Huang
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2016
• 出版时间：November 30, 2016
• 年：2016
• 卷：8
• 期：47
• 页码：32120-32131
• 全文大小：717K
• ISSN：1944-8252

文摘

Electrospinning is a versatile technique for the construction of microfibrous and nanofibrous structures with considerable potential in applications ranging from textile manufacturing to tissue engineering scaffolds. In the simplest form, electrospinning uses a high voltage of tens of thousands volts to draw out ultrafine polymer fibers over a large distance. However, the high voltage limits the flexible combination of material selection, deposition substrate, and control of patterns. Prior studies show that by performing electrospinning with a well-defined “near-field” condition, the operation voltage can be decreased to the kilovolt range, and further enable more precise patterning of fibril structures on a planar surface. In this work, by using solution dependent “initiators”, we demonstrate a further lowering of voltage with an ultralow voltage continuous electrospinning patterning (LEP) technique, which reduces the applied voltage threshold to as low as 50 V, simultaneously permitting direct fiber patterning. The versatility of LEP is shown using a wide range of combination of polymer and solvent systems for thermoplastics and biopolymers. Novel functionalities are also incorporated when a low voltage mode is used in place of a high voltage mode, such as direct printing of living bacteria; the construction of suspended single fibers and membrane networks. The LEP technique reported here should open up new avenues in the patterning of bioelements and free-form nano- to microscale fibrous structures.