Thermal bending of Rectangular Thin Plate with two opposite edges clamped, one edge simply supported and one edge free
详细信息 查看全文
- 作者：Xuansheng Cheng ; Jin Fan
- 关键词：rectangular thin plate ; temperature ; two opposite edges clamped ; one edge simply supported and one edge free ; deflection ; bending moment
- 刊名：KSCE Journal of Civil Engineering
- 出版年：2016
- 出版时间：January 2016
- 年：2016
- 卷：20
- 期：1
- 页码：333-342
- 全文大小：552 KB
- 参考文献：Cheng, X. S. and Du, Y. F. (2006a). “The discussion of the analytical solution about rectangular thin slab under temperature disparity with four simply supported edges.” Low Temperature Architecture Technology, Vol. 28, No. 4, pp. 76–78, DOI: 10.3969/j.issn.1001-6864.2006.04.033 .
Cheng, X. S. and Du, Y. F. (2006b). “Confirm of elasticity coefficient about orthotropic plates of reinforced concrete.” Sichuan Build Science, Vol. 32, No. 5, pp. 30–33.MathSciNet
Cheng, X. S. and Du, X. L. (2013). “The thermal bend of concrete rectangular thin plate with three clamped sides and one free side.” Engineering Mechanics, Vol. 30, No. 4, pp. 97–106, DOI: 10.6052/j.issn.1000-4750.2011.12.0865 .MathSciNet
Cheng, X. S., Du, Y. F., and Li, H. (2006a). “Analytic solution to rectangular thin plate with three clamped edges and one simply supported edge under temperature disparity.” Theory and Application, Proceeding of the Ninth International Symposium on Structural Engineering for Young Experts, pp.789–794.
Cheng, X. S., Du, Y. F., and Li, H. (2006b). “Discuss of analytic solution about rectangular thin plate with four clamped edges under temperature disparity.” Special Structures, Vol. 23, No. 4, pp. 42–45, DOI: 10.3969/j.issn.1001-3598.2006.04.013 .
Cheng, X. S., Du, Y. F., and Li, H. (2006c). “A discussion on the analytical solution of rectangular thin slab under temperature load with four simply supported edges.” Mechanics in Engineering, Vol. 28, No. 6, pp. 28–32, DOI: 10.6052/1000-0992-2005-389 .
Cheng, X. S., Du, Y. F., and Li, H. (2008a). “An analytic solution for rectangular thin slab with two adjacent clamped edges and two adjacent simply supported edges under temperature loads.” Journal of Gansu Sciences, Vol. 20, No. 1, pp. 116–118, DOI: 10.3969/j.issn.1004-0366.2008.01.032 .
Cheng, X. S., Du, Y. F., Li, H., and Dang, Y. (2007a). “Analytic solution about rectangular thin slab with three simply supported edges and one clamped edge under temperature load.” Low Temperature Architecture Technology, Vol. 29, No. 4, pp. 59–61, DOI: 10.3969/j.issn.1001-6864.2007.04.026 .
Cheng, X. S., Du, Y. F., Li, H., and Lan, Q. (2007b). “The analytical Solution about rectangular thin slab with three clamped edges and one simply supported edges under temperature load.” Structure & Environment Engineering, Vol. 34, No. 4, pp. 8–13, DOI: 10.3969/j.issn.1006-3919.2007.04.002 .
Cheng, X. S., Du, Y. F., Li, H., and Shi, X. Y. (2007c). “The analytical solution about thin rectangular slab with two opposite clamped edges and two opposite simply supported edges under temperature loads.” Journal of Gansu Sciences, Vol. 19, No. 2, pp. 39–43, DOI: 10.3969/j.issn.1004-0366.2007.02.034 .
Cheng, X. S., Du, Y. F., Li, H., and Su, J. X. (2008b). “The analytical Solution about rectangular thin slab with two opposite edges clamped and two opposite edges simply supported under temperature load.” Proceeding of the Tenth International Symposium on Structural Engineering for Young Expert, pp. 213–217.
Cheng, X. S., Du, X. L., Zhang, G. W., and He, Q. G (2013). “The thermal bend of concrete rectangular thin plate with three simply supported sides and one free side.” Chinese Journal of applied Mechanics, Vol. 30, No. 1, pp. 37–42.
Cheng, X. S., Su, J. X., and Shi, X. Y. (2009). “The thermal bend of concrete rectangular thin plate with four sides supported.” Special Structures, Vol. 26, No. 4, pp. 56–60, DOI: 10.3969/j.issn.1001-3598.2009.04.012 .
Deshmukh, K. C., Khandait, M. V., Warbhe, S. D., and Kulkarni, V. S.(2010). “Thermal stresses in a simply supported plate with thermal bending moments.” International Journal of Applied Mathematics and Mechanics, Vol. 6, No. 18, pp. 1–12.
Dobroskok, A. and Ghassemi, A. (2005). “Numerical simulation of crack propagation influence by thermal and porous liquid stresses.” International Journal of Fracture, Vol.134, No. 2, pp. 29–34, DOI: 10.1007/s10704-005-1369-9 .CrossRef MATH
Eslami, M. R., Hetnarski, R. B., Ignaczak, J., Noda, N., Sumi, N., and Tanigawa, Y. (2013). “Theory of elasticity and thermal stresses.” Springer Netherlands, Vol. 197, pp. 513–533, DOI: 10.1007/978-94-007-6356-2 .MathSciNet
Fu, B. L. (2004). The energy principle and its application in elastic mechanics, Beijing: Science Press. (In Chinese)
Guo, Z. H. and Shi, X. D. (2003). “Behaviour of of reinforced concrete at elevated temperature and its calculation.” Beijing: Tsinghua University Press, pp. 106–108.
Hetnarski, R. B. and Eslami, M. R. (2009). “Thermal stresses- advanced theory and applications.” Springer Netherlands, Vol. 158, pp. 105–130, DOI: 10.1007/978-1-4020-9247-3 .
Liu, J. X., Guo, X. H., and Su, J. C. (2006). “Water supply and drainage engineering structure.” China Construction Industry Press, pp. 295–344.
Misra, J. C. (1974). “On the thermal bending of a thin elastic simply supported rectangular plate resting on an elastic foundation.” Pure and Applied Geophysics, Vol. 112, No. 1, pp. 83–89, DOI: 10.1007/BF00875921 .CrossRef
National Standard of the People’s Republic of China (2010). Code for design of concrete structures (GB50010-2010), Beijing: China Architecture & Building Press. (In Chinese)
Pachinger, F. and Lrschik, H. (1998). “Fast convergent series solutions for thermal bending of thin rectangular plates.” Journal of Thermal Stresses, Vol. 21, No. 7, pp. 763–775, DOI: 10.1080/01495739808956175 .CrossRef
Zhang, F. F. (1984). Elastic thin plate, Beijing: Science Press. (In Chinese)
Zhong, Y. and Zhang, Y. S. (2005). “Theoretic solution for rectangular thin plate with arbitrary boundary conditions by symplectic geometry method.” Chinese Journal of Applied Mechanics, Vol. 22, No. 2, pp. 293–297, DOI: 10.3969/j.issn.1000-4939.2005.02.029 . - 作者单位：Xuansheng Cheng (1)
Jin Fan (1)
1. School of Civil Engineering, Lanzhou University of Technology, Lanzhou, 730050, China - 刊物类别：Engineering
- 刊物主题：Civil Engineering
Industrial Pollution Prevention
Automotive and Aerospace Engineering and Traffic
Geotechnical Engineering - 出版者：Korean Society of Civil Engineers
- ISSN：1976-3808
文摘
The Rectangular Thin Plate (RTP) of two opposite edges clamped, one edge simply supported and one edge free under temperature disparity is regarded as a superposition of the RTP of three simply supported edges and one edge free under temperature disparity and the RTP under the bending moment with two opposite edges. This condition is based on small deflection theory and superposition principle, with consideration of temperature variation that is perpendicular to the surface. This study obtains the deflection and bending analytical solution for the RTP of two opposite edges clamped, one edge simply supported and one edge free under temperature disparity. Numerical results show that the bending moment and deflection can converge to the exact solutions, and the calculation coefficient table based on the concrete material can provide a theoretical base for subsequent engineering design and calculation of concrete RTP.
© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号 地址：北京市海淀区学院路29号 邮编：100083 电话：办公室：(+86 10)66554848；文献借阅、咨询服务、科技查新：66554700 |