Experimental investigation of the behaviour of spiral steel fibre reinforced concrete beams subjected to drop-weight impact loads

详细信息    查看全文

• 作者：Yifei Hao ; Hong Hao ; Gang Chen
• 关键词：Steel fibre reinforced concrete ; Spiral fibre ; Drop ; weight impact
• 刊名：Materials and Structures
• 出版年：2016
• 出版时间：January 2016
• 年：2016
• 卷：49
• 期：1-2
• 页码：353-370
• 全文大小：3,320 KB
• 参考文献：1.Brandt AM (2008) Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering. Compos Struct 86:3–9CrossRef
  2.Romualdi JP (1963) Mechanics of crack arrest in concrete. J Eng Mech Div ASCE Proc 89(EM3):147–168
  3.Gao J, Sun W, Morina K (1997) Mechanical properties of steel fiber-reinforced, high-strength, lightweight concrete. Cem Concr Compos 19:307–313CrossRef
  4.Balendran RV, Zhou FP, Nadeem A, Leung AYT (2002) Influence of steel fibres on strength and ductility of normal and lightweight high strength concrete. Build Environ 37:1361–1367CrossRef
  5.Ravindrarajah RS, Tam CT (1984) Flexural strength of steel fibre reinforced concrete beams. Int J Cem Compos Lightweight Conc 6(4):273–278CrossRef
  6.Fattuhi NI, Hughes BP (1982) Effect of beam dimensions and concrete filling sequence on the flexural strength of steel fibre reinforced concrete beams. Int J Cem Compos Lightweight Concr 4(2):117–122CrossRef
  7.Qian C, Indubhushan P (1999) Properties of high-strength steel fiber-reinforced concrete beams in bending. Cem Concr Compos 21:73–81CrossRef
  8.Abrishami HH, Mitchell D (1997) Influence of steel fibers on tension stiffening. ACI Struct J 94(6):769–775
  9.Wafa FF, Ashour SA (1992) Mechanical properties of high-strength fiber reinforced concrete. ACI Mater J 89(5):449–455
  10.Bischoff PH, Perry SH (1991) Compressive behaviour of concrete at high strain rates. Mater Struct 24:425–450CrossRef
  11.Hao Y, Hao H, Zhang XH (2012) Numerical analysis of concrete material properties at high strain rate under direct tension. Int J Imp Eng 39:51–62CrossRef
  12.Hao Y, Hao H, Jiang GP, Zhou Y (2013) Experimental confirmation of some factors influencing dynamic concrete compressive strengths in high-speed impact tests. Cem Concr Res 52:63–70CrossRef
  13.Butler JE, Keating J (1981) Preliminary data derived using a flexural cyclic loading machine to test plain and fibrous concrete. Mater Struct 14(1):25–33
  14.Mellinger FM, Birkimer DL (1996) Measurement of stress and strain on cylindrical test specimens of rock and concrete under impact loading. Technical Report No 4-46, Ohio River Division Laboratories, Corps of Engineers
  15.Banthia N, Chokri K, Ohama Y, Mindess S (1994) Fiber-reinforced cement based composites under tensile impact. Adv Cem Based Mat 1:131–141CrossRef
  16.Körmeling HA, Reinhardt HW (1987) Strain rate effects on steel fibre concrete in uniaxial tension. Int J Cem Compos Lightweight Concr 9(4):197–204CrossRef
  17.Holschemacher K, Mueller T, Ribakov Y (2010) Effect of steel fibres on mechanical properties of high-strength concrete. Mater Des 31:2604–2615CrossRef
  18.Bindiganavile V, Banthia N (2001) Polymer and steel fiber-reinforced cementitious composites under impact loading- part 1: bond-slip response. ACI Mater J 98(1):10–16
  19.Bindiganavile V, Banthia N (2001) Polymer and steel fiber-reinforced cementitious composites under impact loading- part 2: flexural toughness. ACI Mater J 98(1):17–24
  20.Kim DJ, El-Tawil S, Naaman AE (2009) Rate-dependent tensile behavior of high performance fiber reinforced cementitious composites. Mater Struct 42:399–414CrossRef
  21.Lok TS, Zhao PJ (2004) Impact response of steel fiber-reinforced concrete using a split Hopkinson pressure bar. J Mater Civil Eng ASCE 16(1):54–59CrossRef
  22.Li VC, Yang EH, Li M (2008) Field demonstration of durable link slabs for jointless bridge decks based on strain-hardening cementitious composites- phase 3: shrinkage control. Michigan Department of Transportation
  23.Xu Z, Hao H, Li HN (2012) Experimental study of dynamic compressive properties of fibre reinforced concrete material with different fibres. Mater Des 33:42–55CrossRef
  24.Xu Z, Hao H, Li HN (2012) Dynamic tensile behaviour of fibre reinforced concrete with spiral fibres. Mater Des 42:72–88CrossRef
  25.Hao Y, Hao H (2013) Dynamic compressive behaviour of spiral steel fibre reinforced concrete in split Hopkinson pressure bar tests. Constr Build Mater 48:521–532CrossRef
  26.ASTM International (2006) Standard test method for compressive strength of cylindrical concrete specimens 2006. Designation: C 39/C 39M
  27.Davies JD, Bose DK (1968) Stress distribution in splitting tests. ACI J 65:662–669
  28.ASTM International (2004) Standard test method for splitting tensile strength of cylindrical concrete specimens 2004. Designation: C 496/C 496M
  29.Tang T (1994) Effects of load-distributed width on split tension of unnotched and notched cylindrical specimens. J Test Eval 22(5):401–409CrossRef
  30.ACI 544.2R-89 (1999) Measurement of properties of fiber reinforced concrete
  31.Chen G, Hao Y, Hao H (2014) 3D meso-scale modelling of concrete material in spall tests. Mater Struct. doi:10.​1617/​s11527-014-0281-z
  
• 作者单位：Yifei Hao (1)
  Hong Hao (1)
  Gang Chen (2)
  
  1. Tianjin University and Curtin University Joint Research Center of Structural Monitoring and Protection, School of Civil and Mechanical Engineering, Curtin University, Kent St, Bentley, WA, 6102, Australia
  2. Institute of Systems Engineering, China Academy of Engineering Physics, Mianyang, 621900, Sichuan, China
  
• 刊物类别：Engineering
• 刊物主题：Structural Mechanics
  Theoretical and Applied Mechanics
  Mechanical Engineering
  Operating Procedures and Materials Treatment
  Civil Engineering
  Building Materials
  
• 出版者：Springer Netherlands
• ISSN：1871-6873

文摘

Concrete is a brittle material with much lower strength in tension as compared to that in compression. Adding fibres into concrete mix has been intensively investigated to increase the ductility, the crack control and energy absorption capabilities. A new type of steel fibre with spiral shape has been proposed recently. It has been demonstrated by laboratory tests that the spiral-shaped fibres have larger displacement capacity and provide better bonding into the concrete mix compared to other types of fibres such as hooked-end, deformed and corrugated fibres. The present study carries out drop-weight impact tests to study the structural responses of concrete beams reinforced with different types of steel fibres. Plain concrete and concrete reinforced by the commonly used hooked-end steel fibres and the proposed spiral-shaped steel fibres were tested. Two volume fractions, i.e. 0.5 and 1.0 %, of fibres were used to prepare steel fibre reinforced concrete (SFRC) specimens. Ø100–200 mm cylindrical specimens were also prepared and tested to determine the static properties of the concretes. Centre-point flexural tests were conducted on 100 × 100 × 350 mm beams with span length of 300 mm under drop-weight impact loads. The static tests were carried out using hydraulic testing machine and the impact tests were conducted using an instrumented drop-weight testing system. A 15.2 kg hard steel was used as the drop-weight impactor. Two drop heights, namely 0.5 and 1.0 m, were adopted in performing the repeated impact tests. The high-speed camera, fast-response load cells and laser linear variable differential transformers were used to record the failure processes, forces and displacements of the tested specimens under impact loads. The force–displacement relations and the corresponding energy absorption capabilities of the SFRC beams were obtained, compared and discussed. The advantage and effectiveness of the spiral-shaped steel fibres in increasing the performance of SFRC beam elements under impact loads are examined.