Preparation and tensile properties of DD5 single crystal castings

详细信息    查看全文

• 作者：Xiang-feng Liang ; Yu-tao Zhao ; Zhi-hong Jia…
• 刊名：International Journal of Minerals, Metallurgy, and Materials
• 出版年：2016
• 出版时间：June 2016
• 年：2016
• 卷：23
• 期：6
• 页码：683-690
• 全文大小：1,840 KB
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Materials Science
  Metallic Materials
  Mineral Resources
  
• 出版者：Journal Publishing Center of University of Science and Technology Beijing, in co-publication with Sp
• ISSN：1869-103X
• 卷排序：23

文摘

The preparation procedure of DD5 single crystal castings was optimized. The microstructure characteristics of DD5 single crystal superalloy were investigated by microstructure observation and segregation behavior examination. The results show that the grain orientation is optimized by constraining the spiral crystallizer in [001] orientation and spatial scale. Also, the γ’ phase of inter-dendrites is larger and more irregular than that in dendrite arms. High temperature tensile tests of DD5 single crystal castings exhibit that the peak stress increases with increasing temperature, while the area reduction shows an opposite trend, when the temperature is below 800°C; meanwhile, when the temperature is between 800°C and 1000°C, the fracture stress of the alloy is the same as the peak stress. The fracture mode changes from shear to ductile with increasing temperature from 600°C and 1000°C.Keywordssuperalloyssingle crystalssegregationtensile propertiesalloy preparationcastings