Multi-output optimization of tribological characteristics control factors of thermally sprayed industrial ceramic coatings using hybrid Taguchi-grey relation analysis

详细信息    查看全文

• 作者：Mohammed Yunus ; Mohammad S. Alsoufi
• 关键词：tribological characteristics ; wear loss ; coefficient of friction ; hybrid Taguchi ; grey relational analysis ; analysis of variance (ANOVA) ; thermal barrier coatings (TBCs)
• 刊名：Friction
• 出版年：2016
• 出版时间：September 2016
• 年：2016
• 卷：4
• 期：3
• 页码：208-216
• 全文大小：1,000 KB
• 刊物主题：Mechanical Engineering; Nanotechnology; Tribology, Corrosion and Coatings; Physical Chemistry; Surfaces and Interfaces, Thin Films;
• 出版者：Springer Berlin Heidelberg
• ISSN：2223-7704
• 卷排序：4

文摘

Lasma-sprayed thermal barrier coatings (TBCs) are gaining wide popularity and becoming more attractive for many industrial applications due to their high strength, thermal barrier/fatigue characteristics at elevated temperatures, resistance to chemical degradation, wear resistance, and environmental corrosion protection provided when coated on the surface of engineering components. To characterize the tribological properties of TBCs, a better understanding of their failure mechanisms and a thorough investigation of their performance are required. In this research, we used Taguchi-based grey relational analysis (GRA) to optimize the process parameters of various tribological characteristics of ceramic coatings applied via an atmospheric plasma spray process. Using Taguchi L16 factorial mixed-level experimental design, we also evaluated tribological characteristics such as wear loss and the coefficient of friction. Using GRA, we successfully performed a multiple output optimization and ranking of the control factors. Based on ANOVA results, we evaluated the significance of each process parameter and validated our findings in tests using the obtained optimum set of process parameters. Our study results will help to minimize wear loss and the coefficient of friction and to maximize TBC life.