Comparison of ZrB₂-MoSi₂ Composite Coatings Fabricated by Atmospheric and Vacuum Plasma Spray Processes

详细信息    查看全文

• 作者：Yaran Niu ; Zhong Wang ; Jun Zhao ; Xuebin Zheng…
• 关键词：coating ; oxidation ; plasma spray ; ZrB2 ; MoSi2
• 刊名：Journal of Thermal Spray Technology
• 出版年：2017
• 出版时间：January 2017
• 年：2017
• 卷：26
• 期：1-2
• 页码：100-107
• 全文大小：
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Surfaces and Interfaces, Thin Films; Tribology, Corrosion and Coatings; Characterization and Evaluation of Materials; Operating Procedures, Materials Treatment; Analytical Chemistry;
• 出版者：Springer US
• ISSN：1544-1016
• 卷排序：26

文摘

In this work, ZrB₂-20 vol.% MoSi₂ (denoted as ZM) composite coatings were fabricated by atmospheric plasma spray (APS) and vacuum plasma spray (VPS) techniques, respectively. Phase composition and microstructure of the composite coatings were characterized. Their oxidation behaviors and microstructure changes at 1500 °C were comparatively investigated. The results showed that VPS-ZM coating was composed of hexagonal ZrB₂, tetragonal and hexagonal MoSi₂, while certain amount of ZrO₂ existed in APS-ZM coating. The oxide content, surface roughness and porosity of VPS-ZM coating were apparently lower than those of APS-ZM coating. The mass gain of APS-ZM coating was maximum at the beginning (1500 °C, 0 h) and then decreased with the oxidation time extending, while the mass of VPS-ZM coating gradually increased with increasing the oxidation time. The possible reasons for the different oxidation behaviors of the two kinds of coatings were analyzed.