A surface quality improvement apparatus for ABS parts fabricated by additive manufacturing

详细信息    查看全文

• 作者：Chil -Chyuan Kuo ; Chen-Wei Wang ; Yi-Feng Lee…
• 关键词：Additive manufacturing ; Surface quality ; Mold ; Aspect ratio ; Vapors of acetone
• 刊名：The International Journal of Advanced Manufacturing Technology
• 出版年：2017
• 出版时间：March 2017
• 年：2017
• 卷：89
• 期：1-4
• 页码：635-642
• 全文大小：
• 刊物类别：Engineering
• 刊物主题：Industrial and Production Engineering; Media Management; Mechanical Engineering; Computer-Aided Engineering (CAD, CAE) and Design;
• 出版者：Springer London
• ISSN：1433-3015
• 卷排序：89

文摘

Minimizing the surface roughness of physical models is a promising research issue in the field of additive manufacturing. An apparatus for enhancing the surface quality of the parts fabricated by additive manufacturing was developed in this study. The surfaces of the parts fabricated by additive manufacturing with different tilt angles, different curvatures, different aspect ratios, and low-pressure wax injection mold were treated by vapors of acetone using the developed apparatus. The developed apparatus is an excellent substitute for the manual polishing that is widely used in the industry currently. The advantages of this apparatus include ease of operation, no waste chemicals, and low costs. The surface quality improvement rate for low-pressure wax injection mold is about 88.82 %. The maximum aspect ratio for surface quality improvement is about 5.2. The surface quality improvement rate for parts with different curvatures is about 83–90 %. In addition, the surface quality improvement rate for parts with different tilt angles is about 84–96 %.