Design of a discrete bending joint using multiple unit PREF joints for isotropic 2-DOF motion

详细信息    查看全文

• 作者：Jung-wook Suh ; Ki-young Kim
• 关键词：Continuum joint ; discrete joint ; isotropic bending ; PREF joint ; stacking sequence ; surgical robot
• 刊名：International Journal of Control, Automation and Systems
• 出版年：2017
• 出版时间：February 2017
• 年：2017
• 卷：15
• 期：1
• 页码：64-72
• 全文大小：
• 刊物类别：Engineering
• 刊物主题：Control, Robotics, Mechatronics;
• 出版者：Institute of Control, Robotics and Systems and The Korean Institute of Electrical Engineers
• ISSN：2005-4092
• 卷排序：15

文摘

Miniature steerable robots are required for various medical applications. Although a typical continuum joint mechanism has a great advantage of miniaturization, it is difficult to have a small bending radius of curvature. With a discrete joint, it is easy to secure definite bending with strength; however, a coarsely structured joint cannot provide a stable distal rolling motion to the end-effector. This paper proposes a method to construct a 2-DOF discrete bending joint using multiple pulleyless rolling joints with an example of a 4-segmental joint. The effects of the stacking sequence on its performance are analyzed. Then, three evaluation criteria are established, and the best stacking sequences are determined. The proposed design method is valid for various numbers of unit joints, and it can be easily applied to the structural design of soft robots resembling snakes or elephant trunks.