Monodisperse thermosensitive particles prepared by emulsifier-free emulsion polymerization with microwave irradiation

详细信息    查看全文

• 作者：Changfeng Yi ; Ziwei Deng and Zushun Xu
• 关键词：Microwave irradiation ; Particle ; Emulsifier ; free emulsion polymerization ; N ; isopropylacrylamide
• 刊名：Colloid & Polymer Science
• 出版年：2005
• 出版时间：August 2005
• 年：2005
• 卷：283
• 期：11
• 页码：1259-1266
• 全文大小：437 KB
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Chemistry
  Polymer Sciences
  Physical Chemistry
  Soft Matter and Complex Fluids
  Characterization and Evaluation Materials
  Food Science
  
• 出版者：Springer Berlin / Heidelberg
• ISSN：1435-1536

文摘

The emulsifier-free emulsion polymerization of styrene (St) and N-isopropylacrylamide (NIPAAm) was successfully carried out with microwave irradiation, and the monodisperse thermoresponsive poly(styrene-co-N-isopropylacrylamide) (poly(St-co-NIPAAm)) particles with diameters in the range 100–130 nm were prepared. The morphology, size and size distribution of the poly(St-co-NIPAAm) particles were characterized by transmission electron microscopy, scanning electron microscopy (SEM) and photon correlation spectroscopy (PCS), respectively. The results showed that poly(St-co-NIPAAm) particles had spherical morphology, and the poly(St-co-NIPAAm) particles prepared by emulsifier-free emulsion polymerization with microwave irradiation were smaller, more uniform than those obtained with conventional heating. The hydrodynamic diameters of poly(St-co-NIPAAm) particles were decreased as the temperature increased from 25 °C to 40 °C, and poly(St-co-NIPAAm) particles collapsed remarkably at 32 °C, which is the lower critical solution temperature of the poly(N-isopropylacrylamide). The morphology of the assembled poly(St-co–NIPAAm) particles was observed by SEM, it was found that monodisperse poly(St-co-NIPAAm) particles could assemble to form the two-dimensional order structures.